Oct 17, 2015 - FDOT Roadway Design and 3D Modeling SS3 – Basic Training. Exercise 5.4. Creating Quantities. EXPORTING DATA TO TRNS*PORT. Drafting standards specified by the CADD Manual and the Pay Item. Right-click and select Import Payitems (aecxml Infrastructure v33) from the popup.
. Where to Begin” in the Installation Guide (Part 2). Attention The labeling on some drives could direct you to the wrong figure below. One family of 7200RPM drives has an IBM logo on the top of its label followed by 'Fireball Plus AS'. For these drives refer to the Quantum Figure below.
Two families of Maxtor drives, clearly labeled Maxtor D540-4K or D740-6L were developed by Quantum before it was absorbed by Maxtor. “Partitioning and formatting using DiskManager” section in the User’s Guide. If your computer still functions incorrectly, contact the IBM HelpCenter, using the information given in “Step 3.
Placing the Call to. Up to 192 KB reserved for drive firmware.
Up to 384 KB reserved for drive firmware. A current table of drive part numbers for your option can be found by searching at for the option part number you purchased. Installation. The date on your sales receipt is the Date of Installation unless IBM or your reseller informs you otherwise. If a Machine does not function as warranted during the warranty period, and IBM or your reseller are unable to either 1) make it do so or 2) replace it with one that is at least functionally equivalent, you may return it to your place of purchase and your money will be refunded. IBM or your reseller of changes in a Machine’s location. IBM is responsible for loss of, or damage to, your Machine while it is 1) in IBM’s possession or 2) in transit in those cases where IBM is responsible for the transportation charges.
GOVERNING LAW Both you and IBM consent to the application of the laws of the country in which you acquired the Machine to govern, interpret, and enforce all of your and IBM s rights, duties, and obligations arising from, or relating in any manner to, the subject matter of this Agreement, without regard to conflict of law principles. As to any other actual damage arising in any situation involving nonperformance by IBM pursuant to, or in any way related to the subject of this Statement of Limited Warranty, IBM s liability will be limited to the charge paid by you for the individual Machine that is the subject of the claim.
Limitation of Liability: The following replaces item 2 in this Section: as to any other actual direct damages, IBM s liability will be limited to the total amount you paid for the Machine that is the subject of the claim. For purposes of this item, the term “Machine” includes Machine Code and Licensed Internal Code. The following item is added to this paragraph: 3. Breach of IBM’s obligations implied by Section 12 of the Sale of Goods Act 1979 or Section 2 of the Supply of Goods and Services Act 1982. Applicability of suppliers and resellers (unchanged). GSA ADP Schedule Contract with IBM Corp. HelpCenter, IBM, and OS/2 are trademarks of the IBM Corporation in the United States, other countries, or both.
Microsoft, Windows, and Windows NT are trademarks of Microsoft Corporation in the United States or other countries or both.
. IP address assignment can be accomplished either by DHCP or by man- ually assigning a static IP address. The ATA-100 can be used with or without SIP regis- tration.
If unregistered, the ATA-100 can perform basic tasks like sending voice data to an IP-PBX or to another device on a LAN. FXO: An FXO port acts like an analog trunk port. It receives talk battery and ring voltage, and provides on hook / off hook indication. It could have an analog phone line plugged into it, or a Viking product that is designed to be connected to a spare analog trunk port.
WAN is the Internet. Let your network administrator know that you would like to install the ATA-100 and ask him to supply you with a static IP address. If this is not a possibility, the ATA-100 can still be installed with a dynamic IP address, but a static address is preferred. # of required ports. Due to the dynamic nature of the product design, the information contained in this document is subject to change without notice. Viking Electronics, and its affiliates and/or subsidiaries assume no respon- sibility for errors and omissions contained in this information. Revisions of this document or new editions of it may be issued to incorporate such changes.
Comments are closed.
|
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |